Proware SN-3163-S3H-NQX

16 bay SAS NAS / DAS (SAS/Fibre) iSCSI Unfied Storage RAID Subsystem

Overview

Companies today are looking for cost effective storage solutions which can offer the best performance, high scalability and reliability. as the number of users and the amount of data grows, Network Attached Storage is becoming a critical technology and the need for optimised solutions is becoming an important requirement. The Proware SN-3163-S3H-NQX is Unified Storage solution encompassing NAS/DAS (iSCSI/SAS/Fibre Channel). Supports HA Cluster configuration with Replication/Snapshots/Mirroring and works with Symantec, CA & BakBone software for backup.

Features

  • SAS or SATA-II support
  • Supports up to Sixteen (16) 1" hot swappable SAS/SATA-II hard drives
  • Support IPMI 2.0 and iKVM (KVM over IP)
  • SAS one SAS port for direct access of RAID host connection
  • Support for Fibre Channel Target (option)
  • Supports hot spare and automatic rebuild
  • Support spin down drives for power saving (MAID) and drive power cycle
  • Schedule volume check data integrity by RAID 3/5/6
  • 64 bit Linux based embedded operating system
  • Supports tape backup/restore
  • Centralised Storage Management
  • Support internet gateway function
  • Online expansion file system
  • 2TB logical volume support
Proware
Proware SN-3163-S3H-NQX

VMware Ready

Datasheet

Proware SN-3163-S3H-NQX Specifications


Hardware Platform
Intel Quad Core Xeon 2.0G or above, single / dual Processor
3GB DDR3 SDRAM up to 32GB
Two Gigabit Ethernet ports (10 Gigabit Ethernet for additional option)
Up to Sixteen 1" hot-swappable SAS/SATA II (3Gb/s, NCQ support) hard drives
Real time drive activity and status indicators
Environmental monitoring unit
Two (2) 700W hot-swap power supplies with PFC
Expansion PCI slot for H/W upgrade
One (1) 4X SAS Host port for RAID Host connection
One (1) 4X SAS Expansion port for JBOD connection (up to 6 SAS JBOD enclosures, max. 112 disks)
One (1) 4X SAS HBA port for next DAS connection (max. 112 disks with 1 RAID + 6 JBOD enclosures)
RAID Controller
Intel IOP341 64 bit RISC
Supports RAID level: RAID 0, 1, 0+1, 3, 5, 6, 30, 50, 60 and JBOD
Supports 512MB up to 2GB of ECC cache memory
Supports hot spare and automatic hot rebuild
Support MAID (spin down drives when not in use to extend service)
Allows online capacity expansion within the enclosure
Built-in serial port interface for remote event notification
Local audible event notification alarm
Storage Management
Volume Management
Disk usage statistics
Hot spare capability
General
File Server Independent
Multiple language support
Support UPS management
System Management
Automatic IP address configuration
Self-contained unit - no extras needed
Management through Web browser
Flash upgradeable unit
SNMP / MRTG management and notification
Fail-free online firmware upgrade
Unicode support
Multi-node Management GUI
proNAS Data and Configuration Backup
Central Management
Networking
Supports NIC / trunking / load balance / fail over / 802.3ad
DHCP Server / DHCP Client
WINS Server
Internet gateway
Protocols
TCP/IP, SMB/CIFS, NFS, SNMP, FTP/SFTP/FXP, HTTP, Telnet, SSH, (Novell by TCP/IP),(Mac by SMB/CIFS)
Support Samba “MediaHarmony”
Client Operating Systems support
Microsoft® Windows® 98/ ME/ NT/2000 / XP / 2003 / Vista /2008
Unix / Linux
Mac OS
Novell
Authentication
Local User Account/Group
Microsoft NT Domain Controller (PDC)
Microsoft Active Directory Authentication (ADS)
Network Information Service (NIS)
Support batch creating users/Group
User quota management
Share level security
File level security
User ID security for NFS
Block Storage
iSCSI Target Support
Data Backup / Restore
Scheduling Multi-Snapshot
Replication
Duplication
Scheduling Rsync Replication
proBackup from client to NAS
Support CDP Server
High Availability
proNAS High Availability (optional)
Power requirements
AC 90V ~ 264V Full range
10A ~ 5A, 47~63Hz
Physical Dimension
133(H) x 482(W) x 716(D) mm