Proware SB-2803-S3A3

8 bay SAS - SATA RAID

Overview

Proware 8 disk bays rackmount SATA RAID with Two 4x mini SAS (3Gb/s) interfaces, provides hard disk, fan and PSU fault tolerance within a small 2U package..

Features

  • Supports hot spare and automatic hot rebuild
  • Allows online capacity expansion within the enclosure
  • Local audible event notification alarm
  • Supports password protection and UPS connection
  • Built-in serial port interface for remote event notification
  • Dual host channels support clustering technology
  • Tagged command queuing for 256 commands, allows for overlapping data streams
  • Transparent data protection for all popular operating systems
  • RAID ADG can tolerate multiple simultaneous drive failures without downtime or data loss
  • Supports multiple array enclosures per host connection.
  • Online RAID level migration
Proware
Proware SB-2803-S3A3

Specifications

Model

SB-2803-S3A3

Form-factor

2U 19-inch rackmount chassis

RAID processor

Intel 80321 64bit RISC

RAID Level

0, 1, 3, 5, 0+1, 6, JBOD

Cache memory

256MB ~ 1024MB

No. of channels (host+drive)

2 + 8

Host bus interface

Two 4x mini SAS (3Gb/s)

Drive bus interface

SATA II

Data transfer rate

Up to 300MB/Sec

Back plane board

SATA II

Hot-swap drive trays

Eight (8) 1-inch trays

Power supply

300W x 2 power supplies w/PFC

Cooling fans

2
Battery Backup Option
R-Link Support YES
SNMP Protocol Support YES
Array Roaming YES

Power requirements

AC 95V ~ 264V Full range 6A / 3A, at 115V / 230V, 47Hz~63Hz

Environmental

Relative Humidity:

10% ~ 85% Non-condensing

Operating Temp:

10°C ~ 40°C (50°F ~ 104°F)

 Physical Dimensions:

88(H) x 482(W) x 650(D)mm 3.46(H) x 18.98(W) x 25.59(D)inches

Weight

13.5kgs / 29.7Lbs (without drives)