Proware SB-2123-S3S3 12 bay SAS - SAS RAID

2U/12 bays, SAS-SAS / SATA II RAID subsystem

Overview

The Proware SB-2123-S3S3 is a 12 bay SAS - SAS or SATA-II RAID system with dual 4Gb ports, one SFF-8088 SAS expansion port, supports RAID levels 0, 1, 0+1, 3, 5, 6, 30, 50, 60 and JBOD, redundant 350w PSU, hot swap drives in a 2U rackmount enclosure.

Features

  • Supports online Array roaming
  • Online RAID level/stripe size migration
  • Online capacity expansion and RAID level migration simultaneously
  • Online Volume Set Expansion
  • Supports multiple array enclosures per host connection
  • Supports greater than 2TB per volume set (64-bit LBA support)
  • Supports 4K bytes/sector for Windows up to 16TB per volume set
  • Support spin down drives when not in use to extend service(MAID)
  • Transparent data protection for all popular operating systems
  • RAID ADG provides the highest level of data protection
  • Instant availability and background initialization
  • Supports hot spare and automatic hot rebuild.
  • Local audible event notification alarm
  • Supports password protection and UPS connection
  • Built-in serial port interface for remote event notification
  • Redundant flash image for high availability.
Proware
Proware SB-2123-F4A3
Proware SB-2123-F4A3

Specification

Model SB-2123-S3S3
Form-factor 2U 19-inch rackmount chassis
RAID Controller Intel IOP341 64-bit
RAID level 0, 1, 3, 5, 6, 30, 50, 60 and JBOD
Cache memory 512MB ~ 2GB DDR2 SDRAM
Host bus interface SAS (3 Gb/s) per port
Drive bus interface SAS or 3Gb/s SATA II
Data transfer rate Up to 300MB/sec per channel
Expansion One 4x mini SAS (SFF-8088)
Hot-swap drive trays Twelve (12) 1-inch trays
Online capacity expansion, RAID level / stripe size migration Yes
Online Volume sets expansion Yes
Online Array roaming Yes
Online consistency check Yes
SMTP manager and SNMP agent Yes
E-mail Notification Yes
Redundant Flash image Yes
R-Link support Yes
Support over 2TB per volume Yes
Instant availability and background initialization Yes
S.M.A.R.T. support Yes
New disk insertion / removal detection Yes
Failed drive auto rebuild Yes
Continuous rebuild Yes
Multiple RAID selection Yes
Bad block auto-remapping Yes
Audible alarm Yes
Password protection Yes
UPS connection Yes
SES2 enclosure management Yes
Hot-swap power supplies Yes
  Cooling fans Two(2) 350W power supplies w/PFC
Battery backup 2
Power requirements Option
Environmental AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~ 63Hz
Relative Humidity 10% ~ 85% Non-condensing
Operating Temp 10oC ~ 40oC (50oF ~ 104oF)
Physical Dimension 88(H)x482(W)x650(D)mm
Weight (Without Disk) 13.5kgs/29.7Lb