OverviewProware EP-2126-SA3 12 disk bays rackmount SATA RAID with Ultra 320 SCSI interface, provides hard disk, fan and PSU fault tolerance within a small 2U package.
|
|
||||||||||||||||||||||||||
Specifications
Model |
EP-2126-SA3 |
|---|---|
Form-factor |
2U 19-inch rackmount chassis |
RAID processor |
Intel 80331 64 bit RISC |
RAID level |
0, 1, 0+1, 3, 5, 6, 30, 50, NRAID and JBOD |
Cache memory |
256MB ~ 1GB ECC DDR SDRAM |
Host bus interface |
Ultra 320 SCSI |
Drive bus interface |
SATA II |
Data transfer rate |
Up to 320MB/Sec |
Back plane board |
SATA II |
Hot-swap drive trays |
Twelve (12) 1-inch trays |
Hot-swappable power supplies |
Two (2) 300W power supplies w/PFC |
Cooling fans |
2 |
R-Link support |
Yes |
UPS connection |
Yes |
Hard Contact Relay connection |
Yes |
SMTP manager and SNMP agent |
Yes |
RAID roaming |
Yes |
Host independent |
Yes |
Environment monitor |
Monitor Temperature、Fan、power supply and voltage |
Continuous rebuild |
Yes |
Online consistency check |
Yes |
Failed drive auto rebuild |
Yes |
Failed drive indicators |
Yes |
Audible alarm |
Yes |
Password protection |
Yes |
Bad block auto-remapping |
Yes |
Power requirements |
AC 90V ~ 264V Full Range, 6A ~ 3A, 47Hz ~ 63Hz |
Environmental |
|
Relative Humidity |
10% ~ 85% Non-condensing |
Operating Temp |
10°C ~ 40°C (50°F ~ 104°F) |
Physical Dimensions |
460 (L) x 482 (W) x 88(H) mm |
Weight |
14kgs (without drives) |
